解析“限额设计”措施对建设项目投资的控制对策

经济新常态下,我国建筑行业得到快速发展。对于建筑工程来说,为节约成本,在"限额设计"思想指导下,必须开展精细化管理,从而提高项目投资的控制能力。然而,在项目建设过程中对于"限额设计"措施的利用水平并不高,不利于企业的可持续发展。因此,本文在分析"限额设计"措施的基础上,提出对建设项目投资的控制对策,希望能够对相关施工管理人员提供借鉴。     

A comparative study for consistency-based decision making with interval multiplicative preference relations

ABSTRACT

To ensure the reasonable application and perfect the theory of decision making with interval multiplicative preference relations (IMPRs), this paper continues to discuss decision making with IMPRs. After reviewing previous consistency concepts for IMPRs, we find that Krej?í’s consistency concept is more flexible and natural than others. However, it is insufficient to address IMPRs only using this concept. Considering this fact, this paper researches inconsistent and incomplete IMPRs that are usually encountered. First, programming models for addressing inconsistent and incomplete IMPRs are constructed. Then, this paper studies the consensus of individual IMPRs and defines a consensus index using the defined correlation coefficient. When the consensus requirement does not satisfy requirement, a programming model for improving consensus level is built, which can ensure the consistency. Subsequently, a procedure for group decision making with IMPRs is offered, and associated examples are provided to specifically show the application of main theoretical results.     

A new controller for boost dc–dc converters based on a novel sliding surface

ABSTRACT

In this paper, two control schemes for boost converters affected by uncertainties in input voltage and load are proposed. The boost converter dynamics is redefined in terms of new state variables to facilitate the use of a disturbance observer that can estimate matched and unmatched disturbances. A sliding surface, which is new in the context of boost converters, is proposed to enable tracking and regulation of output voltage without requiring measurement of input voltage and load current. The stability of the overall system including the disturbance observer, the sliding variable and the output is proved. The performance of the schemes is assessed for regulation of output voltage and tracking of reference voltage by simulation as well as experimentation in which various types of uncertainties and various types of reference voltages are considered.     

煤油气共生矿井底板油型气赋存特征及防治

为了提高煤油气共生矿井油型气灾害治理的科学性，以黄陵二矿为例，采用现场测试、钻探取芯、跟踪观测、地质分析等多种方法，研究了采掘工作面煤层底板油型气分布特征、涌出规律和运移机理，并初步探讨了底板油型气体灾害防治措施。结果表明:底板油型气涌出点多位于底板砂岩储层上倾尖灭端和砂岩透镜体附近，呈现不连续区带状分布特征，涌出的油型气主要来自富县组砂岩层，涌出的动力主要为地层流体压力差，底板油型气通过地层中存在大量的断裂和裂缝、微裂缝系统进入采掘空间，采掘扰动是底板油型气异常涌出的工程诱导因素。建议加强油型气综合探查技术、油型气灾害预测预报技术、油型气综合抽采技术和智能化矿井建设等方面的研究。     

大采高综放工作面强动压端头顶板控制技术

为了解决大采高综放工作面回风侧端头顶板控制问题,针对马道头矿8211工作面的地质情况,通过对回风顺槽超前注浆加固,提高超前支护范围和支护强度,并对回风侧端头三角区煤壁和顶板进行化学浆加固的技术方案,有效控制了顺槽超前区围岩变形和工作面回风侧端头三角区煤壁片帮,保证了工作面端头区顶板安全。     

辉县部分景区地质灾害危险性评估及防治措施研究

为了给辉县景区减灾防灾提供地质依据,根据实际工程概况,研究了辉县部分景区地质灾害危险性预测评估及防治措施,预测评估了工程建设中、建设后可能引发或加剧地质灾害危险性,建设工程自身可能遭受已存在地质灾害危险性;评估了地质灾害危险性综合分区以及根据地质灾害危险性、防治难度和防治效益,对评估区适宜性作出评价,提出了防治地质灾害的措施和建议。     

Quality assurance and quality control of subgrade compaction using the dynamic cone penetrometer

The Dynamic Cone Penetrometer (DCP) is a device that is used in the construction industry for the assessment of in situ soil compaction quality. Over the past few decades, numerous correlations have been developed between the DCP test results and soil strength and stiffness parameters. This paper proposes a comprehensive set of criteria and recommendations for quality control (QC) of compacted subgrade that take into account the inherent statistical variability of DCP test results. For the development of the QC criteria, a new statistical methodology is used to extract representative test values from the raw field DCP test data. In order to use the proposed QC criteria, soils are first classified into two broad categories (fine-grained and coarse-grained) depending on their fabric and response to compaction efforts. Test results indicate that (i) for fine-grained soils, the DCP test values have good correlation with the plasticity index (PI), which is indicative of the type and amount of clay content of the soil and (ii) for coarse-grained soils, the DCP test values have good correlation with the optimum water content of the soil, which is directly related to its in situ density. DCP blow count correlation equations are presented for both soil categories. Recommendations for field DCP testing and data analysis are also provided to highlight the significance of the statistical distribution of the DCP test results in QC testing of compacted subgrade.     

小型特种精细化工过程自动化和信息化研究发展趋势探讨

针对采取小批量间歇性批次生产方式、工艺介质腐蚀性强、危险性大的小型特种精细化工生产工艺研究试验过程自动化、信息化程度不高，导致工艺研究试验中获取数据较少、过程机理研究不够透彻、人工操作多、安全风险高、研究试验消耗大及效率不高等问题，综述了期待通过智能控制、在线分析、模拟仿真和虚拟制造、工况监测及预测性维护以及信息管理和生产调度等关键技术的研究和应用，提高小型特种精细化工生产工艺过程的自动化和信息化程度，实现小型特种精细化工生产工艺过程的数字化、虚拟化和智能化，降低生产安全风险和试验消耗，提高小型特种精细化工生产工艺研究试验的成功率和效率，达到小型特种精细化工生产工艺过程的数字化设计和精准生产的目标。     

基于机器视觉的机车齿轮毂全自动双轴拧紧机的设计和应用

设计了基于机器视觉的机车齿轮毂全自动双轴拧紧机,根据拧紧工艺和扭矩控制原理实现对螺栓拧紧力矩的控制;通过丝杠变径机构,实现不同规格齿轮毂螺栓拧紧;利用机器视觉实现螺栓位置的识别以及初始位置的确定;讨论了自动拧紧机控制系统的硬件组成和软件系统配置,并介绍了防错、防漏功能的设计流程。螺栓自动拧紧机可提高装配精度和操作效率,降低工人的劳动强度。